ng扑克

SD NAND Flash is an embedded storage solution for low-power application.The SD NAND consists of theNAND flash and the high-performance controller with the LGA package.3.3V supply voltage (VCC)is required for the NAND area.The SD NAND Flash is based on an advance 8-pin interface (clock,command,Data*4,power and ground).The SD NAND Flash is fully compliant with SD2 .0/SD3 .0 interface and operation is similar to SD card.

 Advance

 Advanced dynamic ECC engine to improve reliability

 Copyrights Protection Mechanism--Complying with highest security of SDMI standard

 Low power consumption,with the standby energy saving management mode automatically

 High-speed Flash Controller inside

 Interface

 Support clock frequencies 50MHz

 Complies to SD specifications version 2.x/3.x with 1-I/O and 4-I/O

 Supports SPI Mode

 Support UHS-I (SDR50,SDR104,DDR50)

 Power Supply and Consumption

 Voltage range:2.7V ~3.6V

 Standby:100uA (Typical)

 Operating current:40mA(Typical)

 Temperature

 Operation:-40^OC to 85^OC

 Storage:-65^OC to 150^OC

 Reliability

 P/E cycles with ECC:100K

 MTBF:1,000,000hours

Note:The 1Gb-4Gb capacity only supports a clock of 50MHz and is an SD2 .0 interface.